Helloworld0123458:;\]^_`ad 5280 wait5280 wait $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ boot_ac_on=0, boot_dummy_reg_value=abcd2379 $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ load bbt...flash_read_factory load factory to (addr 0x840c8000)... pp 0 okpp 1 okpp_ok = 3 current_pp = 1 seq_num = 1303 tarsize = 1400 read factory from 840c8000 tarsize = 5120 sizeof(default_panel_parameter)=96 5280 wait5280 waitremap(0xb8000e08)=0x1be6 ]get_factory_info() (((factory_read: tmp/factory/000BootParam.h Success!!!))) (((boot_power_on_mode=0 )))dummy_reg=0xabcd2379 logo 1, music 0, light 100, poweron 0, acOn 0 1 : 1,free run 0,suspend raw = no *****info_boot***** REALTEK ROM Monitor, Revision 0001.0716.1017. Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved. For a list of available commands, type 'help'. Compilation time /version= May 23 2013 17:12:20 /0001.0716.1017 MAC address = 00.11.22.33.44.55 Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00 Processor ID/revision = 0x93 / 0x85 Endianness = Little Flash memory size = 512 MByte SDRAM size = 512 MByte First free SDRAM address = 0x800c8000 Read REG 0xb8000200-->0x2 Press 'ESC' to Monitor mode Linux Kernel: FW Image to 0x80100000, size=0x544bdc Audio FW: FW Image to 0x81b00000, size=0xc7e40 Video FW: FW Image to 0x81d80000, size=0x238e90 FW Image to 0x83000000, size=0x17399 Video data(1): boot_av_magic number:0x33445453 Video data Length(1): 0x16e2e3 FW Image to 0x83100000, size=0x16e2e3 boot_av_magic number:0x33445453 boot_av content[Normal boot]: dwMagicNumber:0x33445453 dwVideoStreamAddress:0x1083 dwVideoStreamLength:0xe3e21600 dwAudioStreamAddress:0x0 dwAudioStreamLength:0x0 bVideoDone:0x0 bAudioDone:0x0 bHDMImode:0x0 dwAudioStreamVolume:0x0 dwAudioStreamRepeat:0x0 bPowerOnImage:0x0 bRotate:0x0 audio_buffer_addr:0xc085 audio_buffer_size:0x1000 video_buffer_addr:0xc086 video_buffer_size:0x2 last_image_addr:0x943405 last_image_size:0x6c3b00 REG32(Audio_Mute_GPIO)=0x0 init TAS5711 panel_init set_dclk_sel=9 panel_init panel->iCONFIG_DISPLAY_PORT = 1 panel_init LVDS_4_PORTS_INDEX = 2 panel_init LVDS_4_PORTS_MAPPING_TABLE[LVDS_4_PORTS_INDEX] = 213 5280Go 5280Go [vo] Vodma disable VP_PowerOnVideo VBM: configured to SD! WARNING[1]:VO: don't support this API line 110 VBM: configured to HD! [AUDIO][APP] init app driver -- start ---- [AUDIO][APP] init app driver -- end ------ [AUDIO][APP] Mute[0] CH:0x 0x0000003f [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x 0x0000003f)(1:0x 0x00000000)(2:0x 0x00000000)(3:0x 0x00000000)(4:0x 0x00000000) [AUDIO][APP] Mute[1] CH:0x 0x0000003f [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x 0x0000003f)(1:0x 0x0000003f)(2:0x 0x00000000)(3:0x 0x00000000)(4:0x 0x00000000) [AUDIO][APP] Mute[2] CH:0x 0x0000003f [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x 0x0000003f)(1:0x 0x0000003f)(2:0x 0x0000003f)(3:0x 0x00000000)(4:0x 0x00000000) [AUDIO][APP] Mute[3] CH:0x 0x0000003f [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x 0x0000003f)(1:0x 0x0000003f)(2:0x 0x0000003f)(3:0x 0x0000003f)(4:0x 0x00000000) [AUDIO][APP] Mute[4] CH:0x 0x0000003f [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x 0x0000003f)(1:0x 0x0000003f)(2:0x 0x0000003f)(3:0x 0x0000003f)(4:0x 0x0000003f) [vo] ipg1080p_frc_fhd_dibypass !!! NULL == ptSlrVoInfo WARNING[1]:MPEG_DEC: Under-perf! drop B. pic 87, lagPTS=-7271 [AUDIO][APP] set volume_comp[0] ch=12,vol=0 [AUDIO][APP] Unmute[0] CH:0x 0x00000000 [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x 0x00000000)(1:0x 0x0000003f)(2:0x 0x0000003f)(3:0x 0x0000003f)(4:0x 0x0000003f) [AUDIO][APP] Unmute[1] CH:0x 0x00000000 [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x 0x00000000)(1:0x 0x00000000)(2:0x 0x0000003f)(3:0x 0x0000003f)(4:0x 0x0000003f) [AUDIO][APP] Unmute[2] CH:0x 0x00000000 [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x 0x00000000)(1:0x 0x00000000)(2:0x 0x00000000)(3:0x 0x0000003f)(4:0x 0x0000003f) [AUDIO][APP] Unmute[3] CH:0x 0x00000000 [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x 0x00000000)(1:0x 0x00000000)(2:0x 0x00000000)(3:0x 0x00000000)(4:0x 0x0000003f) [AUDIO][APP] Unmute[4] CH:0x 0x0000003f [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x 0x00000000)(1:0x 0x00000000)(2:0x 0x00000000)(3:0x 0x00000000)(4:0x 0x00000000) HDMI Raw Enable: MPG AC3 DTS MPEG2 AAC DDP WMAPRO MLP SPDIF Raw Enable: MPG AC3 DTS MPEG2 AAC DDP WMAPRO MLP Force 2ch Format: DTS DTSHD AC3 DDP MLP AAC WMAPRO No Power On Music [A] SetAudioDone to addr 0xa0001415 value 0x00000002 ((([BootCode]: I2C_Config2ChLVDS))) Panel_driver.c I2C_Config2ChLVDS 159, [BootCode]Millet3 I2C_Write_EX OK panel_init DCLK Reg(0xb8000530) = 0x2101700 panel_init DCLKOffset Reg(0xb8000540) = 0x87b90089 panel_init DispTiming Reg(0xb8028000) = 0x3130400 panel_init DVTotal Reg(0xb8028014) = 0x465 panel_init DHTotal Reg(0xb802800c) = 0x8970897 panel_init DHTotal Reg(0xb8028294) = 0x9 AAAA adjust colortemp Reg(0xb802a808) = 0x1c2709c2 AAAA adjust colortemp Reg(0xb802a800) = 0x40000001 kernel_entry->offset =0x20000 block_no =0x81 kernel_entry->length =0x544bdc kernel_entry->target_addr =0x80100000 SCPU_CLK90K=0.000 sec. IO_Set PIN_FLASH_WP, isProtect=1 go 0x80100000 mtdparts=rtk_nand:443776k,13184k(/),40960k(/usr/local/etc),26368k rootfstype=squashfs root=31:01 post_hwsetting Reset Ethernet Mac. Address = 0x80100000 Linux version 2.6.34-VENUS (tannar@rtk-tannar) (gcc version 4.3.6 20110218 (prerelease) (GCC) ) #26 PREEMPT Fri Aug 16 16:51:13 CST 2013 Realtek LINUX started... Venus setting: ROSs have 4194304 bytes RAM. System CPU has 1 UART. System CPU uses internal timer interrupt. Bootloader version: 0001.0716.1017. This version string is of new format. Error! Bootloader has a wrong CPU ID? Ethernet Mac address: 00.11.22.33.44.55 Model Config length=0 Base year of RTC is 2010. audio addr: 1b00000 Config serial console: console=ttyS0,115200n8r bootconsole [early0] enabled CPU revision is: 00019385 (MIPS 24Kc) FPU revision is: 01739300 Determined physical RAM map: memory: 00020000 @ 00000000 (reserved) memory: 000e0000 @ 00020000 (ROM data) memory: 01a00000 @ 00100000 (usable) memory: 00500000 @ 01b00000 (reserved) memory: 0e000000 @ 02000000 (usable) memory: 00100000 @ 10000000 (reserved) memory: 07f00000 @ 10100000 (usable) memory: 00100000 @ 18000000 (reserved) memory: 05b00000 @ 18100000 (usable) Wasting 8192 bytes for tracking 256 unused pages Zone PFN ranges: DMA 0x00000000 -> 0x00002000 Normal 0x00002000 -> 0x0001dc00 Movable zone start PFN for each node Node 0: 23552 early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x0001dc00 zone DMA size: 2000 realsize: 2000 zone Normal size: 3c00 realsize: 3c00 zone Movable size: 18000 realsize: 18000 zonelist: Movable Normal DMA Built 1 zonelists in Zone order, mobility grouping off. Total pages: 121856 Kernel command line: mtdparts=rtk_nand:443776k,13184k(/),40960k(/usr/local/etc),26368k rootfstype=squashfs root=31:01 console=ttyS0,115200n8r ip=192.168.0.9::192.168.0.254:255.0.0.0::: PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 32 bytes Writing ErrCtl register=00002211 Readback ErrCtl register=00002211 Memory: 469084k/479232k available (4190k kernel code, 10148k reserved, 1025k data, 176k init, 0k highmem) Disable zone Movable hole addr: 65536 size: 256 hole addr: 98304 size: 256 *****reserve DVR zone... NR_IRQS:8 Estimated CPU frequency: 756.06 MHz Console: colour dummy device 80x25 Calibrating delay loop... 502.98 BogoMIPS (lpj=2514944) Mount-cache hash table entries: 512 devtmpfs: initialized NET: Registered protocol family 16 create bin file success i = 0 PIN_BL_ON_OFF 0000000001011204 i = 1 PIN_LED_FLASH 0080ff0300000008 i = 2 PIN_LED_ON_OFF 0000000100011004 i = 3 PIN_USB3_ON_OFF 0000000000017203 i = 4 PIN_BL_ADJ 0000ff3200000707 i = 5 PIN_LVDS_ON_OFF 0000000000011604 i = 6 PIN_KEYPAD_MENU 0000000a03000001 i = 7 PIN_KEYPAD_GUIDE 0000000a82000001 i = 8 PIN_KEYPAD_LEFT 0000000ac2000101 i = 9 PIN_KEYPAD_RIGHT 0000000a42000001 i = 10 PIN_KEYPAD_SELECT 0000000ac2000001 i = 11 PIN_KEYPAD_UP 0000000a82000101 i = 12 PIN_KEYPAD_DOWN 0000000a00000101 i = 13 PIN_HEAD_PHONE_DETECT 0000000001001f04 i = 14 PIN_HDMI1_HOTPLUG 0000000000011904 i = 15 HDMI1_DDC 0000000000000000 i = 16 HDMI1_PHY_PORT 0000000000000000 i = 17 HDMI1_EDID_TYPE 0000000000000000 i = 18 HDMI1_HPD_TYPE 0000000000000000 i = 19 HDMI1_MUX_PORT 0000000000000007 i = 20 HDMI1_MUX_IC 0000000000000001 i = 21 PIN_HDMI2_HOTPLUG 0000000000011804 i = 22 HDMI2_DDC 0000000000000001 i = 23 HDMI2_PHY_PORT 0000000000000001 i = 24 HDMI2_EDID_TYPE 0000000000000000 i = 25 HDMI2_HPD_TYPE 0000000000000000 i = 26 HDMI2_MUX_PORT 0000000000000007 i = 27 HDMI2_MUX_IC 0000000000000001 i = 28 PIN_HDMI3_HOTPLUG 0000000000011704 i = 29 HDMI3_DDC 0000000000000002 i = 30 HDMI3_PHY_PORT 0000000000000002 i = 31 HDMI3_EDID_TYPE 0000000000000000 i = 32 HDMI3_HPD_TYPE 0000000000000000 i = 33 HDMI3_MUX_PORT 0000000000000007 i = 34 HDMI3_MUX_IC 0000000000000001 i = 35 VGA_DDC 0000000000000003 i = 36 TUNER_I2C 0000000000000000 i = 37 PIN_TUN33V_PWM 000f63001c020507 i = 38 AMP_DEVICE_ADDR 000000000000001a i = 39 PIN_AMP_MUTE 0000000100012004 i = 40 AMP_I2C 0000000000000001 i = 41 EEP_DEVICE_ADDR 0000000000000050 i = 42 PIN_EEP_WP 0000000100018403 i = 43 EEP_I2C 0000000000000002 i = 44 PIN_MISC_2D_3D_SELECT 0000000000010e03 i = 45 PIN_FLASH_WP 0000000101018303 i = 46 AMP_POWER_OHM 0000000000000006 i = 47 PIN_CTR_WIFI_Control 0000000100010903 i = 48 AMP_I2C_SUB_SRC 0000000000000000 i = 49 MILLET3_DEVICE_ADDR 0000000000000070 i = 50 MILLET3_I2C 0000000000000001 i = 51 MILLET3_I2C_SUB_SRC 0000000000000000 i = 52 PIN_LOCAL_DIMM_ON_OFF 0000000100012503 i = 53 PIN_V25_INIT 0000000000013403 i = 54 PIN_V24_INIT 0000000000013503 i = 55 PIN_U25_INIT 0000000000013603 i = 56 PIN_U24_INIT 0000000000013703 i = 57 PIN_M25_INIT 0000000000013403 i = 58 PIN_M24_INIT 0000000000013503 i = 59 IS_1920X1080 0123456789abcdef prom_flashsize = 0x20000000 Flash size is 0x2000000 bio: create slab at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.22.1. cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource MIPS-DMP NET: Registered protocol family 2 Switched to NOHz mode on CPU #0 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. ***************** se init module ********************* se init module major number = 253 size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52... [user land] CmdBuf virt addr = 9d8fc000/bd8fc000, phy addr=1d8fc000 [MCP] Info, mcp device detected ... ***************** gdma init module ********************* gdma init module major number = 247 init_vdso successfull rtice_task start ....... rtktlb: Hello, Realtek TLB Mapper... AllocBP size: 1277952 order: 9 offset: 8192 <<>> 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 7: 0 8: 2 Addr: 90100000, order: 8 Addr: 98100000, order: 8 9: 2 Addr: 90200000, order: 9 Addr: 98200000, order: 9 10: 2 Addr: 90400000, order: 10 Addr: 98400000, order: 10 11: 2 Addr: 90800000, order: 11 Addr: 98800000, order: 11 12: 2 Addr: 91000000, order: 12 Addr: 99000000, order: 12 13: 2 Addr: 82000000, order: 13 Addr: 92000000, order: 13 14: 4 Addr: 84000000, order: 14 Addr: 88000000, order: 14 Addr: 8c000000, order: 14 Addr: 94000000, order: 14 rs------------s-qu-a-s-hf-s: ve iAon u4.d0i (o2 00V9/01/3e1) Phillip Lrougher sion = 4942NTFS driver 2.1.29 [Flags0:3 R /O]. 0-AFFS Drviveenru sR oevr: 32n9e787p (t2u0n1e0-)1 0C5)om mYAFFS oDnriv erV is suecrcessiosfnu l=ly i5n6stal4li8ng. msg6mn6i has beenB isent to 91a6r y src compiled at Aug 2al1g : No test fo2r 0s1t3drng (k rng1)3 loc:12B k Nlayoetr SeCSI g=e neric (bsg-)- dr-iv-er version 0-.-4 -l-oade-d- (major- 246)- --io scheduler n-oo-p- registered io scheduler de-ad-l ne registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A brd: module loaded loop: module loaded Force enable CONFIG_REALTEK_PCBMGR definition. Realtek NAND Flash Driver Rev:337905 (2010-10-18) PIN_FLASH_WP defined value 0x101018303 g_NFWP_no = 131 g_NFWP_value_en = 0 g_NFWP_value_dis = 1 g_NFWP_pinType = 3 Get parameter from register... [rtk_nand_init]Bootcode size 0xc00000 [rtk_nand_init]Factory parameter size 0x400000 [rtk_nand_init]Disable NFCP... nand_base_rtk version: android patch 2012-1112 (X)NAND_POWEROFF_CARDREADER_WITH_MULTI_READ (X)NAND_READ_SKIP_UPDATE_BBT One TC58NVG2S3E chip has 1 die(s) on board nand part=TC58NVG2S3E, id=98dc9015, device_size=536870912, chip_size=536870912, num_chips=1, page_size=2048, isLastPage=0, eccBits=0 [rtk_nand_scan_bbt] have created bbt B1, just loads it !! [dump_BBT] Nand BBT Content Congratulation!! No BBs in this Nand. 4 cmdlinepart partitions found on MTD device rtk_nand RTK: using dynamic nand partition Creating 4 MTD partitions on "rtk_nand": 0x000000000000-0x00001b160000 : "Partition_000" 0x00001b160000-0x00001be40000 : "/" 0x00001be40000-0x00001e640000 : "/usr/local/etc" 0x00001e640000-0x000020000000 : "Partition_003" 0x000000000000-0x000020000000 : "disc" [rtk_nand_init]Ecc bit select 0 Realtek Nand Flash Driver is successfully installing. this eth RX_OFFSET = 0x0 8139cplus: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) MAC address = 0x00.11.22.33.44.55 eth0: RTL-8139C+ at 0xb8016000, 00:11:22:33:44:55, IRQ 2 rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver usbcore: registered new interface driver rtl8150 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core i2c /dev entries driver I2C0 Bus Status Check.... OK ========================= = VER : 2.1b ========================= = PHY : 0 = MODEL: Darwin = SPD : 100 = SAR : 0x024 (7 bits) = TX FIFO DEPTH : 24 = RX FIFO DEPTH : 24 = FIFO THRESHOLD: 4 ========================= I2C1 Bus Status Check.... OK ========================= = VER : 2.1b ========================= = PHY : 1 = MODEL: Darwin = SPD : 100 = SAR : 0x024 (7 bits) = TX FIFO DEPTH : 24 = RX FIFO DEPTH : 24 = FIFO THRESHOLD: 4 ========================= get_i2c_gpio_config failed, invalid i2c id 2 I2C2 Bus Status Check.... OK ========================= = VER : 2.1b ========================= = PHY : 2 = MODEL: Darwin = SPD : 100 = SAR : 0x024 (7 bits) = TX FIFO DEPTH : 24 = RX FIFO DEPTH : 24 = FIFO THRESHOLD: 4 ========================= Linux video capture interface: v2.00 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) Enter snd_card_mars_pcm 3298 Enter snd_card_mars_pcm 3302 Enter snd_card_mars_pcm 3308 ALSA device list: #0: Mars 1 TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers Realtek Darwin Power Management, (c) 2011 Realtek Semiconductor Corp. cp_hotplug WARNING[1]:POV: Wait system to STOP Power on Video!(bVideoDone 2) cp_open init_hw @@@MSR=0xec000000 eth0: Set multicast. init_hw finished eth0: Set multicast. eth0: Set multicast. eth0: Set multicast. ADDRCONF(NETDEV_UP): eth0: link is not ready WARNING[1757941]:POV: Wait system to STOP Power on Video!(bVideoDone 2) IP-Config: Complete: device=eth0, addr=192.168.0.9, mask=255.0.0.0, gw=192.168.0.254, host=192.168.0.9, domain=, nis-domain=(none), bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= VFS: Mounted root (squashfs filesystem) readonly on device 31:1. devtmpfs: mounted Freeing prom memory: 896k freed Freeing unused kernel memory: 176k freed mount: mounting devpts on /dev/pts failed: No such file or directory yaffs: dev is 32505858 name is "mtdblock2" rw yaffs: passed flags "" mkdir: can't create directory '/var/run': File exists Starting INET services.... /etc/init.d/S60lighttpd: line 18: /usr/sbin/sbin/lighttpd: not found Welcome to Realtek Linux Please press Enter to activate this console. Running dvdplayer with RootApp WARNING[1737743]:POV: Wait system to STOP Power on Video!(bVideoDone 2) RootApp AVHDD version... enter 2nd case... ================================================ ================================================ root execute DvdPlayer... ================================================ ================================================ ======== BootUP: enter ======== In my system... *****check animation logo... VIDEO_RPC_VideoDestroy Called!VBM_Destroy 268435456!VMM_Destroy 268435456!VIDEO_RPC_VideoDestroy Return!POV: Release Video =====video is ready... =====audio is ready... Enable zone Movable pli *** 476MB version... initialization... auth: memory address 0x40000000... pinmux b8000870 ffff00ff a800 pinmux b8000890 f0ffffff f000000 pinmux b80008c4 7fffffff 80000000 pinmux b80008c4 ***************** se open: queue = 0 ********************* 7f ***************** se open: initialized = 0 ********************* ffarch/mips/rtk_dmp/drivers/se.c, 718: offset = 0, se_devices = 9d8e0000 ffarch/mips/rtk_dmp/drivers/se.c, 728: offset = 0 ffarch/mips/rtk_dmp/drivers/se.c, 772: length = 20480 0arch/mips/rtk_dmp/drivers/se.c, 773: offset = 495845376 rch/mips/rtk_dmp/drivers/se.c, 780: offset = 495845376 arch/mips/rtk_dmp/drivers/se.c, 718: offset = 98316, se_devices = 9d8e0000 rch/mips/rtk_dmp/drivers/se.c, 728: offset = 402702336 [1arch/mips/rtk_dmp/drivers/se.c, 772: length = 4096 ;3arch/mips/rtk_dmp/drivers/se.c, 773: offset = 402702336 1march/mips/rtk_dmp/drivers/se.c, 780: offset = 402702336 pinmux b8000800 ffffff 48000000 pinmux b8000800 ff00ffff 480000 [pcbMgr] PIN_RESET_TUNER can't find SetupClassBinary: load set------------------- Audio Version = 494203 (venus or neptune) Common Version = 564866 Binary src compiled at Aug 21 2013 13:17:12 Note = ------------------- up<_AO_check_empty> wl= 0x00000000 file ======== BootUP: SetupClass ======== ======== BootUP: firmware_init ======== drvif_Hdmi_regTable 0 c55560 drvif_Hdmi_regTable 0 c55560 drvif_Hdmi_regTable 1 c55690 drvif_Hdmi_regTable 1 c55690 drvif_Hdmi_regTable 2 c557c0 drvif_Hdmi_regTable 2 c557c0 In my system... argc = 2 argv = factory load [INSTALL INFO][src/rtk_mtd.cpp][48] Open MTD_CHAR /dev/mtddisc [INSTALL INFO][src/rtk_mtd.cpp][279] erasesize=0x00020000 [INSTALL INFO][src/rtk_mtd.cpp][67] Open MTD_BLOCK /dev/mtdblockdisc 0+1 records in 0+1 records out 178 bytes (178B) copied, 0.000497 seconds, 349.8KB/s command:dd if=/sys/realtek_boards/system_parameters of=/tmp/str.txt, (line=205) [file=src/rtk_common.cpp], ret(0) [INSTALL INFO][src/rtk_common.cpp][220] Got String(param_addr=10000 tv_system=NTSC panel_file_name=cmi_3d_v390dk1.h boot_flash=nand nand_boot_size=c00000 factory_start=c00000 factory_size=400000 12V5V_GPIO=35,hion cr_pw=b100-1f ) [INSTALL LOG][src/rtk_parameter.cpp][82] Got system_parameter:factory_start 0xc00000 [INSTALL LOG][src/rtk_parameter.cpp][82] Got system_parameter:factory_size 0x400000 command:mkdir -p /tmp/factory, (line=246) [file=src/rtk_factory.cpp], ret(0) gerasesize = 20000 gfactory_start = c00000 gfactory_block_size = 200000 gfactory_size = 200000 gerasesize = 20000 [INSTALL INFO][src/Video pli memory addr[0]= 0xbd427554 Video pli memorry addr[1]= 0xbd4275d4 Video pli memory addr[2]= 0xbd427654 Video pli memory addr[3]= 0xbd4279b4 Video pli memory addr[4]= 0xbd427a4c Video pli memory addr[5]= 0xbd427be0 Video pli memory addr[6]= 0xbd427b50 Video pli memory addr[7]= 0xbd427ba4 Video pli memory addr[8]= 0xbd427bd4 Video pli memory addr[9]= 0x00000000 scalerDrv_Init tk_factory.cpp][193] pp_ok = 3 current_pp = 1 seq_num = 1303 tarsize =5120 10+0 records in 10+0 records out 5120 bytes (5.0KB) copWARNING[1]:VO: don't support ithis API line 124 ed, 0.002474 seconds, 2.0MB/s tmp/factory/ tmp/factory/000BootParam.h tmp/factory/env.txt tmp/factory/HDCP.bin command:cd /;dd if=/dev/mtdblockdisc bs=512 count=10 skip=28672 | tar xv, (line=285) [file=sr=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* c/req: 5994, get: 8000 rt reclaim size: 2000 k_=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* factory.cpp], ret(0) [INSTALL DEBUG][src/rtk_common.cpp][393] remove factory lock success (((load HDCP from factory ))) drvif_Hdmi_regTable 4 c558f0 drvif_Hdmi_regTable 4 c558f0 =====LOAD VGA EDID===== [AUDIO][AIO] init aio driver -- start ---- [AUDIO][AIO] init aio driver -- end ------ [AUDIO][APP] init app driver -- start ---- [AUDIO][APP] init app driver -- end ------ [AVBM: configured to SD! UDIO][ATV] init atv driver -- start ---- [AUDIO][ATV] Support All Standards [AUDIO][ATV] Support A2M DEV_MODE:High [AUDIO][ATV] Support BG/DK/I DEV_MODE:High [AUDIO][ATV] init. global constants [AUDIO][ATV] m_vol_comp_btsc_sap =0x00000000 [AUDIO][ATV] m_vol_comp_btsc_stereo =0x00000000 [AUDIO][ATV] m_vol_comp_btsc_mono =0x00000000 [AUDIO][ATV] btsc_pilot_threshold_high =0x000000b0 [AUDIO][ATV] btsc_pilot_threshold_low =0x00000070 [AUDIO][ATV] btsc_sap_threshold_high =0x00000064 [AUDIO][ATV] btsc_sap_threshold_low =0x00000050 [AUDIO][ATV] btsc_sap_noise_threshold_high =0x000001c0 [AUDIO][ATV] btsc_sap_noise_threshold_low =0x000000c0 [AUDIO][ATV] m_vol_comp_mn_dual =0x00000000 [AUDIO][ATV] m_vol_comp_mn_stereo =0x00000000 [AUDIO][ATV] m_vol_comp_mn_mono =0x00000000 [AUDIO][ATV] init atv driver -- end ------ oliver+, SetRPCTheSameShareMem oliver+, pli alloc memory success System SendShareMemAddrByRPC [AUDIO][AIO] AioThread create... [AUDIO][ATV] AtvThread ceate... cklai+, pli alloc VBI memory success ======== BootUP: tv table init ======== ======== BootUP: ConfigureOSD ======== ======== BootUP: vout init ======== ======== BootUP: resource mgr init ======== abstractap semid=0 semctl ret=0scaler library init ... It had created message queues for state!***** [4k2k] LVDS ch 0->1, src/jpg/hdmi4k/3d[17/0/0/0] ((( [I2C_Config2ChLVDS] No need to change LVDS Ch, 1))) [SLR] set_dclk_sel=9 [4k2k][1] port/Pif/En=[1/1/a] [SLR] mMallocSize=65536 KB@Addr phy/vir[0x8000000/0x0] $$$$$$$$$$$$ drvif_memory_init !!! $$$$$$$$$$$$ drvif_memory_init AllocStartAddr = 8000000 $$$$$$$$$$$$ drvif_memory_init AllocEndAddr = c000000 $$$$$$$$$$$$ drvif_memory_init size = 4000000 System setup environment is completed! ======= Scaler_ForceBg(0, 0, 1 :: 1 ) ========= Initial Display is completed. drvif_Hdmi_Init drvif_Hdmi_EnableEDID : 0 0 drvif_Hdmi_EnableEDID : 1 1 drvif_Hdmi_EnableEDID : 2 2 c6 3d 3 d9 5a 77 14 6b 4d 0 57 14 33 25 29 4d 30 4a 4 64 3f 2f -[vo] FR Ctrl , Table[0]- [vo] force: enable 0, framerate 59940 [vo] double dvs enable: 1, threshold 31000 [vo] High-Bound check: enable 1, Bound 60000, Adjust 60000 [vo] Low-Bound check: enable 1, Bound 50000, Adjust 59940 [vo] Photo 4k22k FR=120000 -[vo] FR Ctrl, Table[1]- [vo] force: enable 0, framerate 59940 [vo] double dvs enable: 0, threshold 31000 [vo] High-Bound check: enable 1, Bound 60000, Adjust 60000 [vo] Low-Bound check: enable 0, Bound 50000, Adjust 59940 [vo] Photo 4k2k FR=120000 b 9 1b -[vo] FR Ctrl, Table[0]- [vo] force: enable 0, framerate 59940 [vo] double dvs enable: 1, th6reshold 31000 [vo] High-Bound check: enable 1, Bound 60000, Adjust 60000 [vo] Low-Bound check: enable 1, Bound 50000, Adjust 59940 [vo] Photo 4k2k FR=120000 -[vo] FR Ctrl, Table[1]- [vo] force: enable 1, framerate 60000 [vo] double dvs enable: 0, threshold 31000 [vo] High-Bound check: enable 1, Bound 60000, Adjust 60000 [vo] Low-Bound check: enable 0, Bound 5000a0, Adjust 59940 [vo] Photo 4k2k FR=120000 5f 14 5 -[vo] FR Ctrl, Table[0]- [vo] force: enable 1, framerate 60000 [vo] double dvs enable: 1,f threshold 31000 [vo] High-Bound check: enable 1, Bound 60000, Adjust 60000 [vo] Low-Bound check: enable 1, Bound 50000, Adjust 59940 [vo] Photo 4k2k FR=120000 -[vo] FR Ctrl, Table[1]- [vo] force: enable 1, framerate 6000 0 [vo] double dvs enable: 0, threshold 31000 [vo] High-Bound check: enable 1, Bound 60000, Adjust 60000 [vo] Low-Bound check: enable 0, Bound 50000, Adjust 59940 [vo] Photo 4k2k FR=120000 5e 3SCALERIOC_SET_PANEL_INFO scalerInfao_setPanelInfo VT/DV.STA/END=1125/16/1096, PanelType=1 2c 74 1e 18 6f 3b 68 6 3 46 5f 42 2d 2c 2 6 18 48 45 6 52 77 7c 7b 2c f 66 39 7e 3c 51 56 36 6c 55 45 14 58 c d 1c 6c 10 2 64 79 41 2c 69 36 e 78 d 3a 7 69 2a 70 a 14 2d 59 3e 38 63 7d 63 46 5a 6c 2b 7e 7f 61 49 25 20 7 4 75 67 3a 49 8 12 4e 44 62 75 70 6a 1b 4b 60 7 7d 1e 20 27 41 a 74 6d 2 58 4 12 54 22 1c 56 2 56 59 7b 1b 4c 1d 31 41 6e 42 6b 4d 36 77 51 e 7c 75 56 1b 17 46 39 32 43 38 4d 2b 4 48 48 6e 76 21 7e 57 3 31 34 1a 6f 4a 74 0 14 35 3f 10 76 49 52 78 9 7b 47 11 2b d 4f 11 44 e 48 1a 37 1a 4a 29 49 7e 17 39 3e 55 6a 68 1a 6b 0 2a 32 12 5c 3d 5b 11 75 2 70 1 6d 1f 5 57 12 77 64 73 6d e f 2e 16 7 55 30 4d b 57 7a 3 2a 39 46 54 43 4b 1c 2e 9 68 1f 51 2b 33 5d 26 d 54 12 27 10 15 4c 7e 3a 3c 16 1 15 32 7c 59 1d 74 0 5 0 9 45 45 17 45 4a 5f 5c 27 32 a a 17 41 1 c 3c 20 41 70 64 1d 49 1c b 77 a 30 7a 2f 5c 6 76 32 Z0 calibrate result = b CK Koffset calibrate result = 1b R Koffset calibrate result = f G Koffset calibrate result = 15 B Koffset calibrate result = 10 drvif_power_on end. End of sync rtnr, dnr, dcc level fw_firmware_createTask() Scaler_ActivateTask [2D3D] forceHoriDec[0] OK [2D3D] WARNING: LINE REPEAT MODE WILL NOT ENABLED IN NON-PR PANEL MODE!! [2D3D] Disable Line Repeat [2D3D] WARNING: D-Domain 2D cvt 3D WILL NOT ENABLED IN NON-PR PANEL MODE!! [2D3D] DD 2Dcvt3D=0 [2D3D] WARNING: ZOOM MODE WILL NOT ENABLED IN NON-PR PANEL MODE!! [2D3D] Set ZoomMode=0 [2D3D] OSD Value=0 ** WARN: Scaler_Set2DCvt3D_Depth(0) ** [2D3D] OSD shiftWay=R/L[1/0] [2D3D] OSD Value=0 [SLR] Mode[1], BW Saving=1 [SLR] Mode[1], ForceMaxFrameRate=1 [SLR] Mode[1], ForceMaxFR=1, FR/Photo=60000/120000 [SLR] Mode[0], ForceMaxFrameRate=1 [SLR] Mode[0], ForceMaxFR=1, FR/Photo=60000/120000 WatchDog does not receive signal for 2 seconds, value: 0 open pli interface twice... open pli interface twice... [TDA18273] INFO, ----------------------------------- [TDA18273] INFO, - TUNER : NXP TDA18273 [TDA18273] INFO, - ADDR : c0 [TDA18273] INFO, - M/S : Master [TDA18273] INFO, - CLK_OUT : OFF [TDA18273] INFO, ----------------------------------- TP buffer register mutex created [RTD2974] Info, demod clock enabled open pli interface twice... [RTD2974] Info, Mode: ATSC, Demod Clock to 162MHz [RTD2974] Info, Demod Hardware Reset!!!! all demod should be re-initialized [RTD2974] Info, CheckDemodReset: Demod 4 has been reset (3e) [TDA18273] INFO, Start init...... [RTD2974_ATSC] Info, Tuner id 19, TV_TUNER_NXP_TDA18273 [RTD2974] Info, CheckDemodReset: Demod 4 has been reset (3e) [RTD2974] Info, ClearDemodReset: reset flag of Demod 4 has been cleared (2e) [RTD2974_ATSC] Info, SetIF, IF_freq=3250000, spectrumn inv=1, agc_pola=0 [RTD2974_ATSC] Info, demod enabled [RTD2974] Info, Mode: ATSC, Demod Clock to 162MHz [RTD2974_ATSC] Info, signal lock = 0, snr = -10.856261, low sig=0, time=110 [RTD2974_ATSC] Info, signal lock = 0, snr = -10.856261, low sig=1, time=219 [RTD2974_ATSC] Info, signal lock = 0, snr = -10.856261, low sig=2, time=329 [RTD2974_ATSC] Info, signal lock = 0, snr = -10.856261, low sig=3, time=440 WatchDog does not receive signal for 2 seconds, value: 0 [RTD2974_ATSC] Info, signal lock = 0, snr = -10.856261, low sig=4, time=551 [RTD2974_ATSC] Info, signal lock = 0, snr = -10.856261, low sig=5, time=660 [RTD2974_ATSC] Info, signal lock = 0, snr = -10.856261, low sig=6, time=770 [RTD2974_ATSC] Info, signal lock = 0, snr = -10.856261, low sig=7, time=880 [RTD2974_ATSC] Info, signal lock = 0, snr = -10.856261, low sig=8, time=990 [RTD2974_ATSC] Info, signal lock = 0, snr = -10.856261, low sig=9, time=1100 [RTD2974_ATSC] Info, signal lock = 0, snr = -10.856261, low sig=10, time=1210 [RTD2974_ATSC] Info, signal lock = 0, snr = -10.856261, low sig=11, time=1320 [RTD2974] Info, Set RTD2974_ATSC_QAM to ATSC mode successed [RTD2974_ATSC] Info, SetIF, IF_freq=3250000, spectrumn inv=1, agc_pola=0 [TP0] WARNING, Darwin TP0 Input = Internal Demod 2694,FE0,OP,OPEN,0 [TVCTL] INFO, creating tuning thread 2694,TVCTL,OP,INIT ======== BootUP: dtv frontend init ...======== ConfigureDisplayWindow Line: 657 ConfigureDisplayWindow Line: 659 2695,TUNER_THREAD,OP,ENTER change ratio[0] ==========> not resetart ======= Scaler_ForceBg(0, 0, 1 :: 1 ) ========= ConfigureDisplayWindow Line: 661 ======== BootUP: main osd show ======== xLoadFromFileSystem: Open file Error[/usr/local/etc/dvdplayer/idtvChannelC.bin] ========================boot=======>559 [DCR] dcr_table.DCR_TABLE[0][0] = 10 [DCR] select_dcr_mode=0 [DCR] m_DCR_Max_Value=100 CDS addr = c2f616 @@@@@Coef[0]=4,Coef[1]=6,Coef[2]=9 ret = -1, update drvif_color_regTV_AutoNR_Signal_Status_table fail !!! m_backlightLevelUiMax = 64 m_backlightLevelUiMin = 0 m_backlightLevelActMax = ff m_backlightLevelActMin = 0 level=64 mapping=0 panelAPI panel SetPwmDuty v=0 ======== BooWARNING[1]:tUGDMA: osd1 low buffer P: Source: 16 ======== ======== BootUP: tv lock init ======== [2D3D] OSD shiftWay=R/L[0/1] [2D3D] OSD Value=0 [2D3D] OSD Value=0 init AMP reg 0xb8000840=0x0 reg 0xb80008c0=0x50000200 reg 0xb8000800=0x30305050 //////xBackgroundInit: ConfigGraphicCanvas VO_GRAPHIC_OSD ======== BootUP: exit ======== In my system... GrandMa[AUDIO] Receive debug memory address x 0x81bcd620 ! [AUDIO] Debug memory address *x is 0x1d20c600 ! SetLPrintBuffer: header address = 0x00000000 RevisionVIDEO_RPC_SetDebugMemory Called!: 513407 Video DebugMem Physical Address = 0x1d20c400 Warning: Could not access RTC kbd_control.cpp thread_tty 961 keyboard: -1 Keypad[0]=PIN_KEYPAD_PWR is active Keypad[1]=PIN_KEYPAD_SELECT is active Keypad[2]=PIN_KEYPAD_MENU is active Keypad[3]=PIN_KEYPAD_UP is active Keypad[4]=PIN_KEYPAD_DOWN is active Keypad[5]=PIN_KEYPAD_LEFT is active Keypad[6]=PIN_KEYPAD_RIGHT is active -=- create FT engine for ./Resource/font/tongfang.ttf [AUDIO][APP] set ts_volume ch=3,vol=45 [AUDIO][APP] ts_vol=45, a=0,b=5,c=5 [AUDIO][APP] ts_vol=45, a=0,b=5,c=5 [AUDIO][APP] TS_Mute[4] CH:0x3 [AUDIO][USR] TS_Mute High = 0x00000000, Low = 0x00000000 The following Format is supported: [AUDIO][LIB] TS_Mute (0:0x0)(1:0x0)(2:0x0)(3 [RPC] TAGC_ENABLE = 0 [RPC] FAGC_ENABLE = 0 [RPC] AGC_HW_volume_Protection = 0 [RPC] AGC_HW_AMP = 0x00d05110 [RPC] gain_max = 0x00000002 ,gain_min = 0x007ef448 [RPC] gain_prev = 0x00d02cc8 ,gain_rise = 0x00000000 [RPC] gain_drop = 0x3ff40820 ,gain_abrupt = 0x3ff40820 [RPC] judge_sample = 0x00ceec30 :0x0)(4:0x3)(5[HDMI 0x00000101] :0x0) file[SPDIF 0x00000101] system 3, cylinder 0 mount to /tmp/hdd/volumes/HDD1 file system 1, cylinder 0 mount to na file system 2, cylinder 0 mount to /tmp/hdd/root m_backlightLevelUiMax = 64 m_backlightLevelUiMin = 0 m_backlightLevelActMax = ff m_backlightLevelActMin = 0 level=64 [AO][raw config:HDMI(0),SPDIF(0)] [AO]SPDIF SELECTION: PCM FIFO panelAPI panel SetPwmDuty v=0 [AbstractAP.cpp:1284:Init].SetAudioDolbyCompressMode(COMPRESS_LINEOUT) [AUDIO][APP] set volume_comp[0] ch=3,vol=-85 SetAudioMute(Speaker) [request] id=2(OSD/AP), mute=0(Unmute) AudioControl_SetBalance:0 [AUDIO][APP] set balance L/R : 0 [AUDIO][APP] Unmute[1] CH:0x3 [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x0)(1:0x0)(2:0x0)(3:0x0)(4:0x0)(5:0x0) eqValue.max_val=6,eqValue.min_val=-6 LPF_0 = 0 BPF_1 = 0 BPF_2 = 0 BPF_3 = 2 BPF_4 = 3 BPF_5 = 3 MAX_V = 6 BPF_5: base=8,offset=1 [AUDIO][APP] set volume_comp[0] ch=3,vol=-85 SetAudioMute(Speaker) [request] id=2(OSD/AP), mute=0(Unmute) [RootAP.cpp:195:Activate], enter ConfigureDisplayWindow Line: 657 ConfigureDisplayWindow Line: 659 change ratio[0] ==========> not resetart ======= Scaler_ForceBg(0, 0, 1 :: 1 ) ========= ConfigureDisplayWindow Line: 661 [Channel] ReloadVideoSource,pCh,sys:0,freq:0 ======= Scaler_ForceBg(0, 1, 1 :: 1 ) ========= drvif_Hdmi_regTable 0 c55560 HdmiEDIDTable_Init(SOURCE_HDMI1) drvif_Hdmi_regTable 0 c55560 ==>source=16 [AUDIO][APP] set ts_volume ch=3,vol=66 [AUDIO][APP] ts_vol=66, a=1,b=2,c=2 [AUDIO][APP] ts_vol=66, a=1,b=2,c=2 Play Source = 16 SetAudioMute(Speaker) [request] id=2(OSD/AP), mute=1(Mute) SetAudioMute(Speaker)(System:Unmute)(PrCtrl:Unmute)(OSD/AP:Mute)(RmCtrl:Unmute)(:Unmute)(:Unmute) SetAudioMute(Speaker) [apply] enableMute=1(Mute) [AUDIO][APP] Mute[4] CH:0x3 [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x0)(1:0x0)(2:0x0)(3:0x0)(4:0x3)(5:0x0) $$$ 111(): time = 0 $$$ 222(): time = 0 $$$ 222-1(): time = 0 $$$ 222()-2: time = 0 AudioLib_SetMute() enable = 1 SetAudioMute(Speaker) [request] id=0(System), mute=1(Mute) SetAudioMute(Speaker)(System:Mute)(PrCtrl:Unmute)(OSD/AP:Mute)(RmCtrl:Unmute)(:Unmute)(:Unmute) SetAudioMute(Speaker) [apply] enableMute=1(Mute) create start( 0x9020fab8) [AUDIO WARNING] no more memory , do Remote Malloc. Size 0x00010000 [AUDIO][USR] Mute [AUDI=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* O]req: 10008, get: 20000 [L reclaim size: f000 IB=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* ] Mute [AUDIO WARNI(NG] [A] malloc 0x00020000, but it'll malloc 0x00040000 [AUDIO WARNING] no more memory , do Remote Malloc. Size 0x00020000 0:0x0)(1:0x0)(2:0x0)(3:0x0)(4:0x3)(5:0x0=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* req: 20008, get: 40000 S reclaim size: 1f000 et=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* AudioMute([AUDIO WARNING] no more memory , do Remote Malloc. Size 0x0007fff8 AVout) [request] id=0(System), mute=1(Mute) SetAudioMute(AVout)(System:Mute)(Pr[AUDIO WARNING] [A] malloc 0x00020000, but it'll malloc 0x00040000 [AUDIO WARNING] no more memory , do Remote Malloc. Size 0x00020000 Ctrl:Unmute)(OSD/AP:Unmute)(RmCtrl:Unmut=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* e)req: 20008, get: 40000 (: reclaim size: 1f000 Un=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* mute)(:U[AUDIO WARNING] no more memory , do Remote Malnloc. Size 0x00010000 mute) SetAudioMute(AVo=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* utreq: 10008, get: 20000 ) reclaim size: f000 [a=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* pply] enab SmoothPlayback create create end leMute=1(Mute) [AUDIO][APP] TS_Mute[4] CH:0x3 [AUDIO][USR] TS_Mute [AUDIO][LIB] TS_Mute (0:0x0)(1:0x0)(2:0x0)(3:0x0)(4:0x3)(5:0x0) SetAudioMute(SPDIF) [request] id=0(System), mute=1(Mute) SetAudioMute(SPDIF)(System:Mute)(PrCtrl:Unmute)(OSD/AP:Unmute)(RmCtrl:Unmute)(:U switch focus: 0xfffffffe -> 0x00000000 nmute)(:Unmute) SetAudioMute(SPDIF) [AO][raw config:HDMI(0),SPDIF(0)] [AO]SPDIF SELECTION: PCM FIFO [apply] enableMute=1(Mute) ======= Scaler_ForceBg(0, 0,< AI> _AIN_Run( 0x9020eaa8) 1 :: 1 ) ========= SourceLib_Play source = 16 CCDecode Filter will be Create [CCDecoderAPI.cpp:48:CCDecoderCreate], gCc_Handler[0].cc_id=0 CCDecodeFilter: m_id = 0 MEM1_ADDR=ca88fc MEM2_ADDR=ca970c RING_BUFFER_ADDR=caa51c [CCDecoderAPI.cpp:80:CCDecoderInit], stc_init OK, id=0 [./PPAout/CPPAOut.cpp 55] audioVersion = 494203 PPAOUT output pin is [vo] Vodma disable pp pin [./PPAout/CPPAOut.cpp:738]SetFocus() m_focusPinID: 0 ???????????? *** aout pause Scaler_ChangeMainSource(index=6, mode=0, std=0) Scaler_ChangeMainSource, panel bg OFF@Scaler_ChangeMainSource [2D3D] PicDeciMode 2 -> 1 [2D3D] forceHoriDec[1] OK zyladd Scaler_ChangeMainSource HdmiDmaCas= 0 QuadFHD.cpp:GetCurQuadFHDMode line:532 :[QUADFHD_DBG] CurrentMode = 0 zyladd Scaler_ChangeMainSource FHDMode= 0 QuadFHD.cpp:GetCurQuadFHDMode line:532 :[QUADFHD_DBG] CurrentMode = 0 QuadFHD.cpp:CheckQuadFHDSetting line:179 :[QUADFHD_DBG] No need to change while in the same mode: 0 [HDMI-DMA] set DMA enable=0 [HDMI-DMA] Set mode=0 [SLR] VoDisp=1 $$$ 222-3(): time = 301 [fw_modestate_reset_3D_mode]=Reset 3D mode (0) to 2D= sRGB Control Hue: 0, Sat: 50 [2D3D]Release src[10].idx[5], vgip2.st[0] ======= Scaler_ForceBg(0, 0, 1 :: 1 ) ========= Initial State: disp = 0, src = 6 drvif_Hdmi_InitSrc 1 HDMI MUX not used drvif_Hdmi_PhyPortEnable : 1 1 drvif_Hdmi_EnableEDID : 1 1 $$$ 333(): time = 451 [AUDIO][APP] set volume_comp[0] ch=3,vol=-79 SetAudioMute(Speaker) [request] id=2(OSD/AP), mute=0(Unmute) SetAudioMute(Speaker)(System:Mute)(PrCtrl:Unmute)(OSD/AP:Unmute)(RmCtrl:Unmute)(:Unmute)(:Unmute) SetAudioMute(Speaker) [apply] enableMute=1(Mute) [AUDIO][APP] Mute[4] CH:0x3 [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x0)(1:0x0)(2:0x0)(3:0x0)(4:0x3)(5:0x0) $$$ 333-1(): time = 451 $$$ 333-2(): time = 452 [AUDIO][APP] set volume_comp[0] ch=3,vol=-79 SetAudioMute(Speaker) [request] id=2(OSD/AP), mute=0(Unmute) AudioControl_SetBalance:0 [AUDIO][APP] set balance L/R : 0 [AUDIO][APP] Unmute[1] CH:0x0 [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x0)(1:0x0)(2:0x0)(3:0x0)(4:0x3)(5:0x0) eqValue.max_val=6,eqValue.min_val=-6 LPF_0 = 0 BPF_1 = 0 BPF_2 = 0 BPF_3 = 2 BPF_4 = 3 BPF_5 = 3 MAX_V = 6 BPF_5: base=8,offset=1 [AUDIO][APP] set volume_comp[0] ch=3,vol=-79 SetAudioMute(Speaker) [request] id=2(OSD/AP), mute=0(Unmute) $$$ 444(): time = 453 SetAudioMute(Speaker) [request] id=2(OSD/AP), mute=0(Unmute) $$$ 555(): time = 454 ======= Scaler_ForceBg(0, 1, 0 :: 1 ) ========= [RootAP.cpp:5893:ReloadVideoSource], leave !!!!! AbstractAP::SetOsdSize (1920, 1080) !!!!! [RootAP.cpp:292:Activate], leave Audio version number: 494203 Video version number: 564869 Version Information: System Revision: 513407. Kernel Revision: 000. Bootup: Unknown. Bootcode: 0001.0716.1017. Audio: 494203 Video: 564869 AbtractAP:xBackgroundInit Start [rtice] echo 473631488 > /sys/module/rtice/parameters/AudioDebugFlagAddr RootApp: 0 rootfs: 0001.0716.1017 Region Code: 0 HW: RTD2975-OSTAR-THTF-4K2K-V1 [rtice] echo 473631232 > /sys/module/rtice/parameters/VideoDebugFlagAddr WatchDog does not receive signal for 2 seconds, value: 0 drvif_Hdmi_EnableEDID : 1 1 drvif_Hdmi_PhyPortEnable : 1 1 [HDMI-3D] buf[0]=48000000(24300 KB) [HDMI-3D] buf[1]=48000000(24300 KB) [HDMI-3D] buf[2]=497bb000(24300 KB) [HDMI-3D] buf[3]=497bb000(24300 KB) create thread tid = 24601 [HDMI-3D] buf[1]=48000000(24300 KB) [HDMI-3D] buf[3]=497bb000(24300 KB) hdmi.force = 0 1 b change [HDMI-DMA] Set mode=0 [HDMI-DMA] set DMA enable=0 HDMI_3D_OPMODE_DISABLE b = 0 ****************** setup phy 2815 2815 ****************** Band: 200M~350M half rate R EQ Average = 5 G EQ Average = 3 B EQ Average = 0 HDMI4K2KPATCH channel = 1 channel = 1 HDMI4K2KPATCH R plus = 9 channel = 1 HDMI4K2KPATCH G plus = 7 channel = 1 HDMI4K2KPATCH B plus = 4 Progressive ........ [VDC] set AUTO oliver+ fw_av_SetMode=18 In my system... b change [HDMI-DMA] Set mode=0 [HDMI-DMA] set DMA enable=0 HDMI_3D_OPMODE_DISABLE b = aff Progressive ........ pixel_clock = 304020 Smean = 0 1 1 2 2 ***************fraction1=41 ***************fraction2=3 ***************cd=0 ***************m=2 ***************n=2 ***************o=0 ***************s=0 ***************pixel_clockx1024=304020 ***************fvco=296 MHz ***************larget=1 In my system... In my system... === ulResult:309 ==== === HS, VS positive ==== panel/000BootParam.h panelspecindex/panelspec_info panel/ panel/benq_e220hd panel/default panel/panelspec/ panel/panelspec/benq_e220hd.h panel/000BootParam.h panelfinal/factoryAreaEnd Boot Param File = [/tmp/panel/000BootParam.h] xLoadTables: = [1] xLoadTables: = [1] xLoadTables: = [100] xLoadTables: = [1] In my system... SetBootPowerOnMode = 0 In my system... argc = 2 argv = factory load [INSTALL INFO][src/rtk_mtd.cpp][48] Open MTD_CHAR /dev/mtddisc [INSTALL INFO][src/rtk_mtd.cpp][279] erasesize=0x00020000 [INSTALL INFO][src/rtk_mtd.cpp][67] Open MTD_BLOCK /dev/mtdblockdisc 0+1 records in 0+1 records out 178 bytes (178B) copied, 0.000681 seconds, 255.3KB/s command:dd if=/sys/realtek_boards/system_parameters of=/tmp/str.txt, (line=205) [file=src/rtk_common.cpp], ret(0) [INSTALL INFO][src/rtk_common.cpp][220] Got String(param_addr=10000 tv_system=NTSC panel_file_name=cmi_3d_v390dk1.h boot_flash=nand nand_boot_size=c00000 factory_start=c00000 factory_size=400000 12V5V_GPIO=35,hion cr_pw=b100-1f ) [INSTALL LOG][src/rtk_parameter.cpp][82] Got system_parameter:factory_start 0xc00000 [INSTALL LOG][src/rtk_parameter.cpp][82] Got system_parameter:factory_size 0x400000 command:mkdir -p /tmp/factory, (line=246) [file=src/rtk_factory.cpp], ret(0) gerasesize = 20000 gfactory_start = c00000 gfactory_block_size = 200000 gfactory_size = 200000 gerasesize = 20000 [INSTALL INFO][src/rtk_factory.cpp][193] pp_ok = 3 current_pp = 1 seq_num = 1303 tarsize =5120 tmp/factory/ tmp/factory/000BootParam.h tmp/factory/env.txt tmp/factory/HDCP.bin 10+0 records in 10+0 records out 5120 bytes (5.0KB) copied, 0.008934 seconds, 559.7KB/s command:cd /;dd if=/dev/mtdblockdisc bs=512 count=10 skip=28672 | tar xv, (line=285) [file=src/rtk_factory.cpp], ret(0) [INSTALL DEBUG][src/rtk_common.cpp][393] remove factory lock success Boot Param File = [/tmp/factory/000BootParam.h] xSaveTables: = [1] xSaveTables: = [1] xSaveTables: = [255] BOOT_POWER_ON_MODE === xSaveTables: = [0] xSaveTables: = [0] xSaveTables: = [0] xSaveTables: = [0] xSaveTables: = [0] xSaveTables: = [0] In my system... bounce_tmp = ba 0 argc = 2 argv = factory save [INSTALL INFO][src/rtk_mtd.cpp][48] Open MTD_CHAR /dev/mtddisc [INSTALL INFO][src/rtk_mtd.cpp][279] erasesize=0x00020000 [INSTALL INFO][src/rtk_mtd.cpp][67] Open MTD_BLOCK /dev/mtdblockdisc 0+1 records in 0+1 records out 178 bytes (178B) copied, 0.000612 seconds, 284.0KB/s command:dd if=/sys/realtek_boards/system_parameters of=/tmp/str.txt, (line=205) [file=src/rtk_common.cpp], ret(0) [INSTALL INFO][src/rtk_common.cpp][220] Got String(param_addr=10000 tv_system=NTSC panel_file_name=cmi_3d_v390dk1.h boot_flash=nand nand_boot_size=c00000 factory_start=c00000 factory_size=400000 12V5V_GPIO=35,hion cr_pw=b100-1f ) [INSTALL LOG][src/rtk_parameter.cpp][82] Got system_parameter:factory_start 0xc00000 [INSTALL LOG][src/rtk_parameter.cpp][82] Got system_parameter:factory_size 0x400000 command:mkdir -p /tmp/factory, (line=246) [file=src/rtk_factory.cpp], ret(0) gerasesize = 20000 gfactory_start = c00000 gfactory_block_size = 200000 gfactory_size = 200000 gerasesize = 20000 [INSTALL INFO][src/rtk_factory.cpp][193] pp_ok = 3 current_pp = 1 seq_num = 1303 tarsize =5120 tar: removing leading '/' from member names tmp/factory/ tmp/factory/HDCP.bin tmp/factory/env.txt tmp/factory/000BootParam.h command:tar cvf /tmp/factory.tar /tmp/factory, (line=422) [file=src/rtk_factory.cpp], ret(0) ***************** header (512 bytes) 5120 RTK ret = 512 ret = 512 ***************** [INSTALL LOG][src/rtk_factory.cpp][455] /tmp/factory.tar filesize:5632 bytes save to current_pp = 0 seq_num = 1304 bounce_tmp = ba 1 0+1 records in 0+1 records out 5632 bytes (5.5KB) copied, 0.032664 seconds, 168.4KB/s command:dd if=/tmp/factory.tar of=/dev/mtdblockdisc bs=131072 count=1 seek=96, (line=471) [file=src/rtk_factory.cpp], ret(0) command:rm /tmp/factory.tar, (line=479) [file=src/rtk_factory.cpp], ret(0) [INSTALL DEBUG][src/rtk_common.cpp][393] remove factory lock success In my system... In my system... bounce_tmp = ba 2 bounce_status = 2 3 Negative edge of IHS to sync This is the current time: PowerUP_Done!!! In my system... IVTotal: 2250 IHTotal: 4400 IHWidth:3840 IVHeight:2160 IVStart:81 IHStart:381 IHFreq:675 IVFreq:300 In my system... IVTotal: 2250 IHTotal: 4400 IHWidth:3840 IVHeight:2160 IVStart:81 IHStart:381 IHFreq:675 IVFreq:300 IVTotal: 2250 IHTotal: 4400 IHWidth:3840 IVHeight:2160 IVStart:81 IHStart:381 IHFreq:675 IVFreq:300 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [usb_param] setting for darwin #@# cfyeh-debug USBPHY_Register_Setting(891) 0xb8013808 = 0x4400a081 #@# cfyeh-debug USBPHY_Register_Setting(893) 0xb8013808 = 0x4400a080 #@# cfyeh-debug USBPHY_SetReg_Default_33_port(203) port 1 dr 7 #@# cfyeh-debug USBPHY_SetReg_Default_33_port(203) port 2 dr 7 IVTotal: 22#@#[cfyeh-debug] USBPHY_Register_Setting(949) 50#@#[cfyeh-debug] USBPHY_Register_Setting(951) IH#@#[cfyeh-debug] USBPHY_Register_Setting(953) To[usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit [usb1_param] usbphy reg 35, set src = 0x7, get src = 0x2, 3bit I[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0x9, 4bit HWidth:3[usb1_param] usbphy reg 32, set sen = 0x9, get sen = 0x9, 4bit 84[usb1_param] usbphy reg 33, set dr = 0x7, get dr = 0x7, 3bit [usb2_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit IVHeigh[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x2, 3bit t:[usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0x9, 4bit 2160 I[usb2_param] usbphy reg 32, set sen = 0x9, get sen = 0x9, 4bit VSt[usb2_param] usbphy reg 33, set dr = 0x7, get dr = 0x7, 3bit arehci ehci: Rtk Dmp EHCI t:81 IHStehci ehci: new USB bus registered, assigned bus number 1 art:38ehci ehci: irq 2, io mem 0xb8013000 1 IHFreq:675 IVFreq:300 4K2K closed all watch dog ehci ehci: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [usb_param] setting for darwin #@# cfyeh-debug USBPHY_Register_Setting(891) 0xb8013808 = 0x4400a080 #@# cfyeh-debug USBPHY_Register_Setting(893) 0xb8013808 = 0x4400a080 #@# cfyeh-debug USBPHY_SetReg_Default_33_port(203) port 1 dr 7 #@# cfyeh-debug USBPHY_SetReg_Default_33_port(203) port 2 dr 7 user resu#@#[cfyeh-debug] USBPHY_Register_Setting(949) #@#[cfyeh-debug] USBPHY_Register_Setting(951) [#@#[cfyeh-debug] USBPHY_Register_Setting(953) HD[usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit MI-DMA][usb1_param] usbphy reg 35, set src = 0x7, get src = 0x2, 3bit Set mo[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0x9, 4bit de[usb1_param] usbphy reg 32, set sen = 0x9, get sen = 0x9, 4bit =0 [HDMI-DMA] set DMA enable=0 HDMI_3D_OPMODE_DISABLE[usb1_param] usbphy reg 33, set dr = 0x7, get dr = 0x7, 3bit b [usb2_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit = aff[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x2, 3bit [usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0x9, 4bit Progress[usb2_param] usbphy reg 32, set sen = 0x9, get sen = 0x9, 4bit iv[usb2_param] usbphy reg 33, set dr = 0x7, get dr = 0x7, 3bit e ....ohci ohci: Rtk Dmp OHCI ...ohci ohci: new USB bus registered, assigned bus number 2 . piohci ohci: irq 2, io mem 0xb8013400 xel_clock = 304020 Smean = 0 1 1 2 2 ***************fraction1=41 ***************fraction2=3 ***************cd=0 ***************m=2 ***************n=2 ***************o=0 ***************s=0 ***************pixel_clockx1024=304020 ***************fvco=296 MHz ***************larget=1 #######[cfyeh-debug] hub_events(3692) usb_plug_status 1 === ulResult:309 ==== === HS, VS positive ==== hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected #@# cfyeh-debug usb3_phy_setting_darwin(305) +++ usb 1-2: new high speed USB device using ehci and address 2 bounce_tmp = 91 0 #@# cfyeh-debug usb3_phy_setting_darwin(482) --- bounce_xhci xhci: Rtk Dmp XHCI tmpxhci xhci: new USB bus registered, assigned bus number 3 = 91 1 xhci xhci: irq 2, io mem 0xb8050000 usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected #@# cfyeh-debug usb3_mac_setting_darwin(487) +++ #@# cfyeh-debug usb3_mac_setting_darwin(508) 16bit #@# cfyeh-debug usb3_mac_setting_darwin(509) *(unsigned int volatile *)0xb8058200=0x1448 #@# cfyeh-debug usb3_mac_setting_darwin(510) *(unsigned int volatile *)0xb8058200=0x1448 #@# cfyeh-debug usb3_mac_setting_darwin(512) *(unsigned int volatile *)0xb8058200=0x1408 #@# cfyeh-debug usb3_mac_setting_darwin(523) 0xb8013258 = 0x7; #@# cfyeh-debug usb3_mac_setting_darwin(525) 0xb8013258 = 0x7; #@# cfyeh-debug usb3_mac_setting_darwin(529) GTXTHRCFG bounce_#@# cfyeh-debug usb3_mac_setting_darwin(530) 0xb8058108 = 0x02400008 tmp = #@# cfyeh-debug usb3_mac_setting_darwin(535) 0xb8058108 = 0x21010000 91#@# cfyeh-debug usb3_mac_setting_darwin(538) GRXTHRCFG 2 bou#@# cfyeh-debug usb3_mac_setting_darwin(539) 0xb805810c = 0x02000008 nc#@# cfyeh-debug usb3_mac_setting_darwin(544) 0xb805810c = 0x21080000 e_status#@# cfyeh-debug usb3_mac_setting_darwin(549) disable usb mulit request = 1 #@# cfyeh-debug usb3_mac_setting_darwin(550) *(unsigned int volatile *)0xb8013200=0x0 3 Neg#@# cfyeh-debug usb3_mac_setting_darwin(552) *(unsigned int volatile *)0xb8013200=0x0 ative edge #@# cfyeh-debug usb3_mac_setting_darwin(557) GUSB3PIPECTL of#@# cfyeh-debug usb3_mac_setting_darwin(558) 0xb80582c0 = 0x00060002 IHS to#@# cfyeh-debug usb3_mac_setting_darwin(561) 0xb80582c0 = 0x00060202 s#@# cfyeh-debug usb3_mac_setting_darwin(564) --- ync IVTotal: 2250 IHTotal: 4400 IHWidth:3840 IVHeight:2160 IVStart:81 IHStart:381 IHFreq:675 IVFreq:300 rescan pci bus [System2ApDaemon.cpp,threadSys2ApExe,158]msg type = 6 ,msg len =scsi0 : usb-storage 1-2:1.0 7 ,msg = 31 2D 32 20 55 50 00 00 ((([Sys2ApBridge.cpp-CallBack_usb_event-581] CMD - event_#######[cfyeh-debug] hub_events(3696) usb_plug_status 0 id#######[cfyeh-debug] usb_stor_scan_thread(841) usb_plug_status 1 = 6 MessageNumber = 1 ,MSG = 1-2 UP))) (((USB: Insert !!))) Key [-100] processed. IVTotal: 2250 IHTotal: 4400 IHWidth:3840 IVHeight:2160 IVStart:81 IHStart:381 IHFreq:675 IVFreq:300 find: /sys/bus/pci/slots/: No such file or directory /sbin/pci: line 39: can't create /sys/bus/pci/rescan: nonexistent directory AbtractAP:xBackgroundInit Completed IVTotal: 2250 IHTotal: 4400 IHWidth:3840 IVHeight:2160 IVStart:81 IHStart:381 IHFreq:675 IVFreq:300 IVTotal: 2250 IHTotal: 4400 IHWidth:3840 IVHeight:2160 IVStart:81 IHStart:381 IHFreq:675 IVFreq:300 4K2K closed all watch dog Hotplug got one USB Hotplug of "Add" from port "1-2". [HDMI-DMA] Set mode=0 [HDMI-DMA] set DMA enable=0 [HDMI-DMA] set DMA enable=0 use tx timing 2250 [HDMI-DMA][4k2k] wid/vfeq=3840/300 drvif_Hdmi_DetectMode 2478 bHDMIColorSpace = COLOR_RGB IsInterlaced = 0 bIsHDMIDVI = 1 VedioFSMState = 4 AudioFSMState = 0 ColorDepth = HDMI_COLOR_DEPTH_8B ColorMetry = HDMI_COLORIMETRY_NOSPECIFIED 3D Format = UNDEFINED FW 3D Format = UNDEFINED HDMI_3D_OPMODE_HW DEPTH2BITS[timing->depth] = 8 components[timing->color] = 8 h_act_len = 480 len = 32 rem = 32 num = 14 Hdmi_SetupVODMA newVo[0] [HDMI-DMA] Set mode=1 Hdmi_ForceVODMA2D drvif_Hdmi_DetectMode 2580 [4k2k] LVDS ch 1->0, src/jpg/hdmi4k/3d[8/0/1/0] QuadFHD.cpp:I2C_Config2ChLVDS line:418 : ((([QUADFHD_DBG] I2C Write Success (I2C_Config2ChLVDS), is2Ch=0))) [4k2k][0] port/Pif/En=[2/3/f] [frank] Debug ucHdmi_Real3Dfmt =15, cur3DMode=0 [HDMI-DMA] VODMA IS ENABLED!! [HDMI-DMA] Set mode=2 [2D3D]Got VO Src in[8] Scaler_ChangeMainSource(index=8) [DBG] Ignore panelBG disable Scaler_ChangeMainSource, panel bg OFF@Scaler_ChangeMainSource [2D3D] PicDeciMode 1 -> 2 [2D3D] forceHoriDec[0] OK zyladd Scaler_ChangeMainSource HdmiDmaCas= 2 sRGB Control Hue: 0, Sat: 50 [2D3D]Release src[6].idx[2], vgip2.st[0] ======= Scaler_ForceBg(0, 0, 1 :: 1 ) ========= #######[cfyeh-debug] usb_stor_scan_thread(869) usb_plug_status 2 [HDMI-DMA] IGNORE SRC RELEASE!scsi 0:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2 ! Initial State: disp = 0, s#@#[cfyeh-debug] sd_probe(2301) sd_flag 1 rc = 8 [HDMI-DMA] IGNORE RE-INIT CVoInitial #@#[cfyeh-debug] sd_probe(2367) sd_flag 0 sd 0:0:0:0: Attached scsi generic sg0 type 0 #@#[cfyeh-debug] sd_probe_async(2209) sd_flag 1 #@#[cfyeh-debug] sd_revalidate_disk(2084) sd_flag 2 #######[cfyeh-debug] usb_stor_scan_thread(872) usb_plug_status 1 #######[cfyeh-debug] usb_stor_scan_thread(879) usb_plug_status 0 HDMI_3D_OPMODE_HW DEPTH2BITS[timing->depth] = 8 components[timing->color] = 8 h_act_len = 480 len = 32 rem = 32 num = 14 Hdmi_SetupVODMA newVo[0] Hdmi_ForceVODMA2D +++version=0 CUSBDetectMode done!! mode=10 h_start=70 v_start=13 h_width=1920 v_length=1080 h_total=2060 v_total=1112 chroma_fmt=0 progressive=1 h_freq=1346 v_freq=1200 pixel_clk=277312500 i_ratio=0 source=0 afd=0 mode_3d=0 force2d=0 IsJPEG=0 launcher=0 [ICS][2D] FreeRun=0, 3D/FR=0/1200 VO: mode=100, aspect ratio=0 Enter Set DataFormat Handler Enter ColorSpaceYUV2RGBTransfer $$$check YUV2RGB double buffer buffer_status=1!!$$$check YUV2RGB double buffer buffer_status=1!!original size 70 1920 13 1080 @@h_start_even_odd_flag=0 src type=2 100 hratio=100 vratio=100 after overscan 70 1920 13 1080 @@@@@@ adust data 0 0 0 0 0 @@@@@@ adust data 1 0 0 0 0 @@@@@h_start=70 @@@@@h_width=1920 @@@@@v_WARNING[1]:GDMA: osd1 underflow WARNING[1]:GDMA: accident sync start=13 @@@@@v_length=1080 Scaler_DispGetInputInfo(SLR_INPUT_DISPLAY)=0 in capture window $$$$$$$$ 2.Scaler_ForceBg 0xb8028000 = 13030400 $$$$$$$$ 2.Scaler_ForceBg 0xb8025200 = 0 $$$$$$$$ 2.Scaler_ForceBg 0xb8027328 = 41 ======= Scaler_ForceBg(0, 0, 1 :: 1 ) ========= $$$$$$$$ Modestate Black Background Start !!! Setup State: display:0 [3D]GET_IS3DFMT = 0, GET_HDMI_3DTYPE = f, 3D_FLOW = 0 [2Dcvt3D] 2Dcvt3DMode=0, Disp3D=0, vgip2St=0, DI/Cut4[0/0], V.len/Aft[1080/1080] IPV_ACT_LEN = 0x438, usAfterDILen = 0x438, IPH_ACT_WID = 0x780 CapLen = 0x438, CapWid = 0x780 MEM_ACT_LEN = 0x438, MEM_ACT_WID = 0x780 DispLen = 0x438, DispWid = 0x780 IV_FREQ = 0x4b0 display: 0, Not Enter DI Set DisplayTiming State: display:0, state = 1, failcount = 0 ulFreq=296143749 [check dclk ] info->IPV_ACT_LEN=438 info->IPH_ACT_WID = 780 !! [check dclk ]disp_h_total=2200, disp_len=1080, disp_wid=1920 DClk2 = 299475000 Hz & Max DClk2 = 300000000 Hz & Min Dclk2 = 50000000 Hz hotal=2200 vtotal=1125 framerate=121 dclk debug 299475000 14973000 1000 1 [ICS][2D] FreeRun=0, 3D/FR=0/1200 over dclk, get fine tune dclk after finetune DClk2 = 285710000 Hz & Max DClk2 = 300000000 Hz & Min Dclk2 = 50000000 Hz [SLR] Mcode[3c] change to[23] [SLR] set_dclk_sel=0 xOnMessage message=51a, data=0 xOnMessage end [3D] ratio_num=3->0, div=0@80000001 [2D3D]Src[2] FRC/W/H/Freq/Prog[0/1920/1080/1200/1(di=0)] [modestate_set_display_on] [ICS][2D] FreeRun=0, 3D/FR=0/1200 [FS][SG][4port][VO.2D] set dclk div=0, M/N=0 [SLR] set_dclk_sel=0 QuadFHD.cpp:CheckQuadFHDSetting line:183 :[QUADFHD_DBG] QuadFHD.cpp:CheckQuadFHDSetting line:218 :[QUADFHD_DBG] QUADFHD_PHOTO_MODE !!!!! AbstractAP::SetOsdSize (1920, 1080) !!!!! [HDMI-DMA] Set mode=3 ++++++++++++++++++++++++++++Erin VIP color handler+++++++++++++++++++++++++++++++++++++++ ==========drvif_Hdmi_IsAudioLock=0================ ===================================================================== :::==== fwif_vip_source_check ====::: :::==== input_src_type=2, input_src_from=6 ====::: :::==== Scaler_VOFrom()=0 ====::: :::==== drvif_scalerVideo_readMode()=0====::: :::==== Scaler_DispGetInputInfo(SLR_INPUT_MODE_CURR)=100====::: :::==== Scaler_InputSrcFormat=19====::: ===================================================================== $$$$$-hh which_source=19 $$$$$$$$ ==============@@m_prevSource=255, source=19=================== handle gamma, which_value=1, pre_value=2 ====S-Gamma enable setting =====================1=1==index,mode =====================1=1==4==index,mode,colortemp ####drvif_color_noisereduction_spatialc #### level=4 #### spatialc reg write error=0 spatialc reg write setting [OK] ####drvif_color_noisereduction_spatialy #### level=4 #### spatialy reg write setting [OK] ===sharpness_adjust=== which_source=27====level=50===== ===sharpness_adjust==== GET_UI_SOURCE=8 ,== which_table=7========== ====== which_source=27========== ====== Dnoise_Coef[0]=255, Dnoise_Coef[1]=255========== ====== Dnoise_Coef[2]=14, Dnoise_Coef[3]=14========== ====== Dnoise_Coef[4]=5, Dnoise_Coef[5]=5========== ====== Dnoise_Coef[6]=1, Dnoise_Coef[7]=0========== SceneChange=1 fwif_color_set_dcc_level 8 0 1 0 ::::fwif_color_rtnr_y_adjust::::RTNR_Y_C_Coeff=77777777 :::: ===================================================================== :::==== fwif_vip_source_check ====::: :::==== input_src_type=2, input_src_from=6 ====::: :::==== Scaler_VOFrom()=0 ====::: :::==== drvif_scalerVideo_readMode()=0====::: :::==== Scaler_DispGetInputInfo(SLR_INPUT_MODE_CURR)=100====::: :::==== Scaler_InputSrcFormat=19====::: ===================================================================== $$$$$-hh which_source=19 $$$$$$$$ 1.SetShigh==1==112==6==3================= ====S-Gamma enable setting =====================112=1==index,mode =====================112=1==4==index,mode,colortemp ++++++++++++++++++Erin EDGE++++++++++++++++++++++++++++++ ++++++++Erin Egsm_type=1 , edsm=0 +++++++++++++ ===sharpness_adjust=== which_source=27====level=50===== ===sharpness_adjust==== GET_UI_SOURCE=8 ,== which_table=7========== ====== which_source=27========== ====== Dnoise_Coef[0]=255, Dnoise_Coef[1]=255========== ====== Dnoise_Coef[2]=14, Dnoise_Coef[3]=14========== ====== Dnoise_Coef[4]=15, Dnoise_Coef[5]=15========== ====== Dnoise_Coef[6]=1, Dnoise_Coef[7]=0========== UNSHARP_mask = 0@@@@@@@@===gene 1.Scaler_SetDNRTable=0== ========================================= Scaler_SetNew_RTNR_style=0 ========================================= fwif_color_set_New_RTNR_style=0 src_idx=8,fwif_color_set_RTNR_style_adjust=0 fwif_color_set_RTNR_style_adjust=0 drvif_color_newrtnr=0 ========================================= VIP_QUALITY_FUNCTION_newRTNR_mixWeight=4 ========================================= fwif_color_get_New_RTNR_mixcal_weight=4 ========================================= VIP_QUALITY_FUNCTION_DCC_Slow=4 ========================================= ========================================= VIP_QUALITY_FUNCTION_DCC_Shigh=0 ========================================= ========================================= VIP_QUALITY_FUNCTION_DCC_Sindex=a ========================================= fwif_color_set_DCC_Sindex, value=10 @@@@@@===get_contrast=50===@@@@@@@ @@@@@@===get_brightness=50===@@@@@@@ @@@@@@===get_contrast=50===@@@@@@@ @@@@@@===get_brightness=50===@@@@@@@ ===>(Driver) Bri : 96, Con : 134 Color_SetYContrastBrightness:134 96 QuadFHD.cpp:GetCurQuadFHDMode line:532 :[QUADFHD_DBG] CurrentMode = 1 Color_SetUV_Sat=157 === UV test reg. K13=166=== === UV test reg. K11=200=== QuadFHD.cpp:GetCurQuadFHDMode line:532 :[QUADFHD_DBG] CurrentMode = 1 ===sharpness_adjust=== which_source=27====level=50===== ===sharpness_adjust==== GET_UI_SOURCE=8 ,== which_table=7========== ====== which_source=27========== ====== Dnoise_Coef[0]=255, Dnoise_Coef[1]=255========== ====== Dnoise_Coef[2]=14, Dnoise_Coef[3]=14========== ====== Dnoise_Coef[4]=15, Dnoise_Coef[5]=15========== ====== Dnoise_Coef[6]=1, Dnoise_Coef[7]=0========== ====S-Gamma enable setting =====================112=1==index,mode =====================112=1==4==index,mode,colortemp QuadFHD.cpp:GetCurQuadFHDMode line:532 :[QUADFHD_DBG] CurrentMode = 1 QuadFHD.cpp:GetCurQuadFHDMode line:532 :[QUADFHD_DBG] CurrentMode = 1 o2--Scaler_SetDNR = value = 2------o ####drvif_color_noisereduction_spatialc #### level=4 #### spatialc reg write setting [OK] ####drvif_color_noisereduction_spatialy #### level=4 #### spatialy reg write setting [OK] ::::fwif_color_rtnr_y_adjust::::RTNR_Y_C_Coeff=77777777 :::: ===================================================================== :::==== fwif_vip_source_check ====::: :::==== input_src_type=2, input_src_from=6 ====::: :::==== Scaler_VOFrom()=0 ====::: :::==== drvif_scalerVideo_readMode()=0====::: :::==== Scaler_DispGetInputInfo(SLR_INPUT_MODE_CURR)=100====::: :::==== Scaler_InputSrcFormat=19====::: ===================================================================== $$$$$-hh which_source=19 $$$$$$$$ SceneChange=1 fwif_color_set_dcc_level 8 0 1 0 QuadFHD.cpp:GetCurQuadFHDMode line:532 :[QUADFHD_DBG] CurrentMode = 1 QuadFHD.cpp:GetCurQuadFHDMode line:532 :[QUADFHD_DBG] CurrentMode = 1 modprobe: module 'sd_mod' not found Send display ready to UI thread ======= Scaler_ForceBg(0, 0, 0 :: 000000000 ) ========= [3D] Disable Panel Backgrond audioSource = 16 clean TV source TV wait change status 0 TV change 0 finish [AUDIO][ATV] tv Mute = 0 [AUDIO][APP] Unmute[3] CH:0x0 [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x0)(1:0x0)(2:0x0)(3:0x0)(4:0x3)(5:0x0) [AIO] nr 0 sr 2 index 74 [AIO] nr um 1 at fffffff8 dam a xOnMessage message=51b, data=0 xDisplayReady() data = 0 ======= Scaler_ForceBg(0, 2, 0 :: 000000000 ) ========= [3D] Disable Panel Backgrond SetAudioMute(Speaker) [request] id=1(PrCtrl), mute=0(Unmute) SetAudioMute(AVout) [request] id=1(PrCtrl), mute=0(Unmute) SetAudioMute(SPDIF) [request] id=1(PrCtrl), mute=0(Unmute) ======= Scaler_ForceBg(0, 3, 0 :: 000000000 ) ========= [3D] Disable Panel Backgrond ======= Scaler_ForceBg(0, 0, 0 :: 000000000 ) ========= [3D] Disable Panel Backgrond AudioLib_SetMute() enable = 0 SetAudioMute(Speaker) [request] id=0(System), mute=0(Unmute) SetAudioMute(Speaker) [apply] enableMute=0(Unmute) [AUDIO][APP] Unmute[4] CH:0x3 [AUDIO][USR] Mute [AUDIO][LIB] Mute (0:0x0)(1:0x0)(2:0x0)(3:0x0)(4:0x0)(5:0x0) SetAudioMute(AVout) [request] id=0(System), mute=0(Unmute) SetAudioMute(AVout) [apply] enableMute=0(Unmute) [AUDIO][APP] TS_Unmute[4] CH:0x3 [AUDIO][USR] TS_Mute [AUDIO][LIB] TS_Mute (0:0x0)(1:0x0)(2:0x0)(3:0x0)(4:0x0)(5:0x0) SetAudioMute(SPDIF) [request] id=0(System), mute=0(Unmute) SetAudioMute(SPDIF) [apply] enableMute=0(Unmute) xOnMessage end [DEBUG]SwitchAPTo(pCurAP:RootAP new:MenuBarAP) [RootAP.cpp:5899:GiveUpFocus], enter [RootAP.cpp:5901:GiveUpFocus], leave ############### m_bIsActivate = 1 Create View 0 unrecognized key!!![4k2k] Scaler_GetRoiInfo mode = 109 Scaler_GetRoiInfo IsHDMI = 1 Scaler_GetRoiInfo hz = 30 //// on paint bitblt double buffer //// sd 0:0:0:0: [sda] 512000 512-byte logical blocks: (262 MB/250 MiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Assuming drive cache: write through #@#[cfyeh-debug] sd_revalidate_disk(2143) sd_flag 1 #@#[cfyeh-debug] sd_revalidate_disk(2084) sd_flag 2 ====== OSD_TIMEOUT_TIMER ====== sd 0:0:0:0: [sda] Assuming drive cache: write through #@#[cfyeh-debug] sd_revalidate_disk(2143) sd_flag 1 sda: #@#[cfyeh-debug] sd_revalidate_disk(2084) sd_flag 2 rmdir: '/var/lock/hotplug/mount_tmp/.sda': No such file or directory ufsd: module license 'Commercial product' taints kernel. Disabling lock debugging due to kernel taint ====== OSD_TIMEOUT_TIMER ====== ufsd: driver 8.5 (Aug 16 2013 16:55:05) LBD=ON with delayalloc with ioctl loaded at c0144000 NTFS read/write support included Hfs+/HfsX read/write support included Built for: realtek_new_ic_2011-04-29 sd 0:0:0:0: [sda] Assuming drive cache: write through #@#[cfyeh-debug] sd_revalidate_disk(2143) sd_flag 1 sd 0:0:0:0: [sda] Attached SCSI removable disk #@#[cfyeh-debug] sd_probe_async(2268) sd_flag 0 ufsd: use builtin utf8 instead of kernel utf8 mount: mounting /dev/sda on /var/lock/hotplug/mount_tmp/.sda failed: Invalid argument ====== OSD_TIMEOUT_TIMER ====== ufsd: use builtin utf8 instead of kernel utf8 mount: mounting /dev/sda on /var/lock/hotplug/mount_tmp/.sda failed: Invalid argument ufsd: use builtin utf8 instead of kernel utf8 mount: mounting /dev/sda on /var/lock/hotplug/mount_tmp/.sda failed: Invalid argument NTFS-fs warning (device sda): parse_options(): Option iocharset is deprecated. Please use option nls= in the future. mount: mounting /dev/sda on /var/lock/hotplug/mount_tmp/.sda failed: Invalid argument FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! readlink: Invalid argument ====== OSD_TIMEOUT_TIMER ====== BUS_TYPE = usb Hotplug: mount -t ufsd -o force,ro,nls=utf8,umask=0,noatime /dev/sda /var/lock/hotplug/mount_tmp/.sda ret: 255 Hotplug: mount -t ntfs -o ro,iocharset=utf8,umask=0 /dev/sda /var/lock/hotplug/mount_tmp/.sda ret: 255 Hotplug: mount -t vfat -o rw,shortname=winnt,iocharset=utf8,umask=0 /dev/sda /var/lock/hotplug/mount_tmp/.sdaret: 0 reserve 2, name: sda cmd_buffer: ln -s /tmp/usbmounts/sda /tmp/ramfs/volumes/C: file system: vfat device: /dev/sda fat32... reserved: 6222 fat_size: 985 sec_size: 512 clus: 4 fats: 2 root: 2 volume name: FAT32, len: 5 bus_type: usb (env) port_structure: 1-2 (env) [System2ApDaemon.cpp,threadSys2ApExe,158]msg type = 4 ,msg len = 48 ,msg = 73 64 61 20 55 50 20 2F [Sys2ApBridge.cpp-CallBack_block_event-671] CMD - event_id = 4 MessageNumber = 1 ,MSG = sda UP /tmp/usbmounts/sda /tmp/ramfs/volumes/C: [System2ApDaemon.cpp,threadSys2ApExe,158]msg type = 4 ,msg len = 24 ,msg = 73 64 61 20 52 45 41 44 [Sys2ApBridge.cpp-CallBack_block_event-671] CMD - event_id = 4 MessageNumber = 1 ,MSG = sda READY host0 USB 1-2 ACTION: READY ==> host0, USB, 1-2 !! AppendStorageDevice Device Name : sda Add Device 3 Path : /dev/sda Some of the INQUIRY command's response: Generic Flash Disk 8.07 INQUIRY duration=0 millisecs, resid=60 removable = 1 Card is not locked UpdateStorageInfo : !!!3!!! In my system... Hotplug: Mount "sda" successfully. Hotplug got one BLOCK Hotplug of "Add" from "sda" Hotplug got one BLOCK Hotplug of "Ready" from "sda" #@# GetFsFatType(2625) FAT32 Find 0 dev_id : !!!1-2!!!, link : !!!C:!!!, mnt : !!!/tmp/usbmounts/sda!!! Current Storge Device ID : -1 !! STORAGE TYPE 6 BLOCK : UPDATE !! Key [-50] processed. Key [-50] processed. //// on paint bitblt double buffer //// ====== OSD_TIMEOUT_TIMER ====== ====== CMD_SWITCHTO_CATEGORY1 ====== [DEBUG]SwitchAPTo(pCurAP:MenuBarAP new:RootAP) Delete View 0 [RootAP.cpp:5907:RestoreFocus], enter [RootAP.cpp:5909:RestoreFocus], leave Key [302] processed.